Datasheet

TMC8462 Datasheet • Document Revision V1.5 • 2019-June-21
34 / 204
5.4.5 External Circuit for Adjustable Switching Regulator 1
Switching regulator 1 is an internal buck switching regulator and generates an adjustable supply rail with
approximately 500mA. The voltage at SW1 can be adjusted using a resistor network in the switching
regulator’s feedback path at VOUT_FB. VOUT_FB should be at 1.2V using a resistor divider. SW1 can be
used to power the high voltage IOs using VIO1, VIO2, VIO3 as well as switching regulator 0 input VS0 (which
generates a fixed 3.3V rail). SW1 can also be used to power other peripheral devices, e.g., Hall signals of a
BLDC motor or external encoders.
More information on the switching regulators is given in Section 7.21.
GND1
TMC8462
SW1
22µH
22µF
MSS1P6
+
47µF
4.7kΩ
100kΩ
VOUT_FB
VOUT
adj. out
VS1
VS
Figure 23: External circuit for adjustable buck regulator
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com