Datasheet

TMC8462 Datasheet • Document Revision V1.5 • 2019-June-21
139 / 204
7.3.10 High Voltage Status and General Control
7.3.10.1 Register 59 – HV_ANA_STATUS
Bit Description ECAT PDI Range [Unit]
7:0 HVIO_OUTPUT_HV_DETECT,
bit[i] = 1 = high voltage detected at HV output [i]
r/- r/-
15:8 HV_SHORT2GND_DETECT,
bit[i] = 1 = short to ground detected at HV IO [i-8]
r/- r/-
23:16 HV_SHORT2VS_DETECT,
bit[i] = 1 = high voltage detected at HV IO [i-16]
r/- r/-
24 HV_OT_FLAG r/- r/-
25 B3V3_SC_FLAG r/- r/-
26 BVOUT_SC_FLAG r/- r/-
27 BVOUT_OT_FLAG r/- r/-
31:28 unused/reserved r/- r/-
Table 184: MFC IO Register 59 – HV_ANA_STATUS
7.3.10.2 Register 63 – SYNC1_SYNC0_EVENT_CNT
Bit Description ECAT PDI Range [Unit]
15:0 SYNC_OUT0 event counter value r/- r/- 0 . . . + (2
16
) − 1
31:16 SYNC_OUT1 event counter value r/- r/- 0 . . . + (2
16
) − 1
Table 185: MFC IO Register 63 – SYNC1_SYNC0_EVENT_CNT
Note
Reading does not clear counters. Counters are running all the time and wrap
when maximum count is reached.
Note
Register 63 can only be read when mapped to the ECAT Process Data RAM. It
cannot be read from the MCF CTRL SPI interface.
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com