Datasheet

TMC8462 Datasheet • Document Revision V1.5 • 2019-June-21
104 / 204
6.4.19.3 Latch0 Status (0x09AE)
Bit Description ECAT PDI Reset Value
0 Event Latch0 positive edge.
0: Positive edge not detected or continuous
mode
1: Positive edge detected in single event mode
only.
Flag cleared by reading out Latch0 Time Posi-
tive Edge.
r/- r/- 0
1 Event Latch0 negative edge.
0: Negative edge not detected or continuous
mode
1: Negative edge detected in single event mode
only.
Flag cleared by reading out Latch0 Time Nega-
tive Edge.
r/- r/- 0
2 Latch0 pin state r/- r/- 0
7:3 Reserved r/- r/- 0
Table 111: Register 0x09AE (Latch0 Status)
6.4.19.4 Latch1 Status (0x09AF)
Bit Description ECAT PDI Reset Value
0 Event Latch1 positive edge.
0: Positive edge not detected or continuous
mode
1: Positive edge detected in single event mode
only.
Flag cleared by reading out Latch1 Time Posi-
tive Edge.
r/- r/- 0
1 Event Latch1 negative edge.
0: Negative edge not detected or continuous
mode
1: Negative edge detected in single event mode
only.
Flag cleared by reading out Latch1 Time Nega-
tive Edge.
r/- r/- 0
2 Latch1 pin state r/- r/- 0
7:3 Reserved r/- r/- 0
Table 112: Register 0x09AF (Latch1 Status)
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com