Datasheet

TMC8462 Datasheet • Document Revision V1.5 • 2019-June-21
102 / 204
6.4.18.8 SYNC0 Cycle Time (0x09A0:0x09A3)
Bit Description ECAT PDI Reset Value
31:0 WTime between two consecutive SYNC0 pulses
in ns.
0: Single shot mode, generate only one SYNC0
pulse.
r/(w) r/(w) 0
Table 107: Register 0x09A0:0x09A3 (SYNC0 Cycle Time)
Note
Write to this register depends upon setting of 0x0980.0.
6.4.18.9 SYNC1 Cycle Time (0x09A4:0x09A7)
Bit Description ECAT PDI Reset Value
31:0 Time between SYNC1 pulses and SYNC0 pulse
in ns
r/(w) r/(w) 0
Table 108: Register 0x09A4:0x09A7 (SYNC1 Cycle Time)
Note
Write to this register depends upon setting of 0x0980.0.
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com