Datasheet

TMC4671 Datasheet • IC Version V1.00 | Document Revision V1.03 • 2018-Sept-06
143 / 158
9 Electrical Characteristics
9.1 Absolute Maximum Ratings
The maximum ratings may not be exceeded under any circumstances. Operating the circuit at or
near more than one maximum rating at a time for extended periods shall be avoided by application design.
Parameter Symbol Min Max Unit
Digital I/O supply voltage VCCIO 3.6 V
Logic input voltage VI 3.6 V
Maximum current drawn on VCCIO with no load on pins I_IO 70 mA
Maximum current drawn on VCCIO with no load on pins and
clock off
I_IO_0Hz 3 mA
Maximum current drawn on V5 at fCLK = 25MHz I_V5 25 mA
Maximum current to / from digital pins and analog low voltage
I/Os
IIO 10 mA
Junction temperature TJ -40 125 °C
Storage temperature TSTG -55 150 °C
ESD-Protection for interface pins (Human body model, HBM) VESDAP 2 kV
ESD-Protection for handling (Human body model, HBM) VESD1 2 kV
ADC input voltage VAI 0 5 V
Table 23: Absolute Maximum Ratings
VCCCORE is generated internally from VCCIO and shall not be overpowered by external supply.
9.2 Electrical Characteristics
9.2.1 Operational Range
Parameter Symbol Min Max Unit
Junction temperature TJ -40 125 °C
Digital I/O 3.3V supply voltage VIO3V 3.15 3.45 V
Core supply voltage VCC_CORE 1.65 1.95 V
Table 24: Operational Range
The ∆Σ ADCs can operate in differential or single ended mode. In differential mode the differential input
voltage range must be in between -2.5V and +2.5V. However, it is recommended to use the input voltage
range from -1.25V to 1.25V, due to non-linearity of ∆Σ ADCs. In Single ended mode the operational input
range of the positive input channel should be between 0V and 2.5V. Recommended maximum input
voltage is 1.25V. ADCs have
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com