Datasheet

TMC2660 DATASHEET (Rev. 1.06 / 2017-JUN-15) 2
www.trinamic.com
APPLICATION EXAMPLES: SMALL SIZE – BEST PERFORMANCE
The TMC2660 scores with power density, integrated power MOSFETs, and a versatility that covers a wide
spectrum of applications and motor sizes, all while keeping costs down. Extensive support at the chips,
board, and software levels enables rapid design cycles and fast time-to-market with competitive products.
High energy efficiency from TRINAMIC’s coolStep technology delivers further cost savings in related systems
such as power supplies and cooling.
TMC4210+TMC2660-EVAL EVALUATION-BOARD FOR 1 AXIS
Top level layout of TMC2660-EVAL
ORDER CODES
Order code
Description
Size [mm²]
TMC2660-PA
coolStep™ driver with internal MOSFETs, up to 30V DC,
QFP-44 with 12x12 pins
10 x 10
TMC2660-EVAL
Evaluation board for TMC2660.
85 x 55
LANDUNGSBRÜCKE
Baseboard for TMC2660-EVAL and further evaluation boards
85 x 55
ESELSBRÜCKE
Connector board for plug-in evaluation board system
61 x 38
Evaluation board system with TMC2660
This evaluation board is a development
platform for applications based on the
TMC2660. The board features a USB interface
for communication with the TMCL-IDE control
software running on a PC. The power
MOSFETs of the TMC2660 support drive
currents up to 2.4A RMS and 29V.
The control software provides a user-friendly
GUI for setting control parameters and
visualizing the dynamic response of the
motor.
Motor movement can be controlled through
the Step/Dir interface using inputs from an
external source or signals generated by the
onboard microcontroller acting as a step
generator. Optionally add a motion controller
card between CPU board and TMC2660-EVAL.