Datasheet
TMC2590-EVAL Evaluation Board • Document Revision V1.0 • 2019-AUGUST-16
9 / 11
3.4 CoolStep™ Tuning
With the TMCL IDE and the EVAL-KIT you have a powerful tool to find your CoolStep
™
to run your motor
most energy efficient and cool. To tune it, please open the CoolStep
™
& StallGuard2
™
window you’ll find
on the left of the IDE when you have connected the EVAL board. On the CoolStep
™
tab you will see below
picture by default.
Figure 8: TMCL IDE v3.0.20.0 Parameter calculator
CoolStep
™
will get activated as soon as you change the "Hysteresis start" value higher than 0 and enter a
"Threshold speed" value higher than 0.
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com