Datasheet

TMC2590-EVAL Evaluation Board • Document Revision V1.0 • 2019-AUGUST-16

3 / 11

1 Getting Started

You need

• TMC2590-EVAL

•

Landungsbruecke or Startrampe with latest

ﬁrmware (We recommend the Landungs-

bruecke as it oﬀers faster USB communication.)

• 1 x Eselsbruecke

• Stepper motor

• USB interface

• Power Supply

• Latest TMCL-IDE V3.0 and PC

• Cables for interface, motors and power

Precautions

•

Do not mix up connections or short-circuit pins.

• Avoid bounding I/O wires with motor wires.

•

Do not exceed the maximum rated supply sup-

ply voltage!

•

Do not connect or disconnect the motor while

powered!

• START WITH POWER SUPPLY OFF!

Figure 1: Getting started

NOTICE

The Landungsbruecke operates on USB Power Supply. All other voltages are

generated from V_M. Kit works only, when V_M is applied.

Terms of delivery and rights to technical change reserved.

Download newest version at www.trinamic.com