User Manual

PD-1160 V1.1 Hardware Manual (Rev. 1.02 / 2013-JUL-23) 5
www.trinamic.com
2 Order Codes
The PD-1160 is currently available with two different stepper motor series (NEMA23 / 57mm flange size or
NEMA24 / 60mm flange size):
With NEMA 23 / 57mm flange size motor:
The length of the PANdrives is specified without the length of the axis. For the overall length of the
product please add 24mm.
Order code
Description
Size (mm
3
)
PD57-1-1160
PANdrive with 0.55Nm max./holding torque
60 x 60 x 58
PD57-2-1160
PANdrive with 1.01Nm max./holding torque
60 x 60 x 68
Table 2.1 Order codes (PD57-1160)
With NEMA 24 / 60mm flange size motor:
The length of the PANdrives is specified without the length of the axis. For the total length of the
product add 24mm.
Order code
Description
Size (mm
3
)
PD60-3-1160
PANdrive with 2.10Nm max./holding torque
60 x 60 x 82
PD60-4-1160
PANdrive with 3.10Nm max./holding torque
60 x 60 x 103
Table 2.2 Order codes (PD60-1160)
A cable loom set is available for this module:
Order code
Description
PD-1160-CABLE
Cable loom for PD-1160:
- 1x cable loom for power connector (length 200mm)
- 1x cable loom for communication connector (length 200mm)
- 1x cable loom for multipurpose I/O connector (length 200mm)
- 1x cable loom for S/D connector (length 200mm)
- 1x cable loom for encoder connector (length 200mm)
- 1x USB type A connector to mini-USB type B connector cable (length 1.5m)
Table 2.3 Cable loom order codes