User Manual

PD42-1140 CANopen® Firmware Manual • Firmware Version V3.20 | Document Revision V2.10 • 2018-DEC-01
26 / 109
Sub-Index 02
h
contains the transmission type of the RPDO. This can be FF
h
or FE
h
for event-driven, or 00
h
for synchronous.
Object Description
Index Name Object Type Data Type
1400
h
– 1403
h
Receive PDO parameter RECORD RPDO CommPar
1400
h
RPDO 1 RECORD RPDO CommPar
1401
h
RPDO 2 RECORD RPDO CommPar
1402
h
RPDO 3 RECORD RPDO CommPar
1403
h
RPDO 4 RECORD RPDO CommPar
Table 44: Object Description (1400
h
)
Entry Description
Sub-index Description Access Value Range Default Value
00
h
Largest sub-index
supported
ro 2 2
01
h
COB-ID used by
PDO
rw UNSIGNED32 Index 1400
h
: 200
h
+ Node-ID
Index 1401
h
: 300
h
+ Node-ID
Index 1402
h
: 400
h
+ Node-ID
Index 1403
h
: 500
h
+ Node-ID
02
h
Transmission type rw UNSIGNED8 Index 1400
h
: FF
h
Index 1401
h
: FF
h
Index 1402
h
: FF
h
Index 1403
h
: FE
h
Table 45: Entry Description (1400
h
)
3.1.19 Objects 1600
h
– 1603
h
: Receive PDO Mapping Parameter
These objects contain the mapping parameters for the RPDOs the device is able to receive. The sub-index
00
h
contains the number of valid entries within the mapping record. This number of entries is also the
number of the application variables which shall be received with the corresponding RPDO. The sub-indices
from 01
h
to the number of entries contain the information about the mapped application variables. These
entries describe the PDO contents by their index, sub-index and length.
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com