User Manual

PD-x-1670 TMCL
™
Firmware Manual • Firmware Version V2.0 | Document Revision V1.0 • 2018-Oct-29
20 / 82
Binary Form of MVP COORD, 0, 8
Field Value
Target address 01
h
Instruction number 04
h
Type 02
h
Motor/Bank 00
h
Value (Byte 3) 00
h
Value (Byte 2) 00
h
Value (Byte 1) 00
h
Value (Byte 0) 08
h
Checksum 0F
h
Note
Before moving to a stored coordinate, the coordinate has to be set using an SCO,
CCO or ACO command.
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com