User Manual

PD42-1140 CANopen® Firmware Manual • Firmware Version V3.20 | Document Revision V2.10 • 2018-DEC-01
57 / 109
5.1.2 Object 605B
h
: Shutdown Option Code
This object indicates what action is performed if there is a transition from operation enabled state to ready
to switch on state. The shutdown option code always has the value 0 as only this is supported.
Value Definition
Value Definition
0 Disable drive function (switch off the power stage)
Table 157: Value Description (605B
h
)
Object Description
Index Name Object Type Data Type
605B
h
Shutdown option code Variable UNSIGNED16
Table 158: Object Description (605B
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 rw no 0 0
Table 159: Entry Description (605B
h
)
5.1.3 Object 605C
h
: Disable Operation Option Code
This object indicates what action is performed if there is a transition from operation enabled state to
switched on state. The disable operation option code always has the value 1 as only this is supported. The
slow down ramp is the deceleration value of the used mode of operation.
Value Definition
Value Definition
1 Slow down on slow down ramp
Table 160: Value Description (605C
h
)
Object Description
Index Name Object Type Data Type
605C
h
Disable operation option code Variable UNSIGNED16
Table 161: Object Description (605C
h
)
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com