User Manual

PD-x-1670 TMCL
™
Firmware Manual • Firmware Version V2.0 | Document Revision V1.0 • 2018-Oct-29
68 / 82
All Global Parameters of the PD-x-1670 Module in Bank 0
Number Global Parameter Description Range [Units] Default Access
65 serial baud rate RS485/RS232 baud rate
0 - 9600 baud
1 - 14400 baud
2 - 19200 baud
3 - 28800 baud
4 - 38400 baud
5 - 57600 baud
6 - 76800 baud
7 - 115200 baud
0 . . . 7 7 RW
66 serial address The module (target) address for
RS485, RS232, and virtual COM port.
1 . . . 255 2 RWX
69 CAN bit rate CAN bit rate
2 - 20 kBit/s
3 - 50 kBit/s
4 - 100 kBit/s
5 - 125 kBit/s
6 - 250 kBit/s
7 - 500 kBit/s
8 - 1000 kBit/s
2 . . . 8 8 RW
70 CAN send ID The CAN send ID of the module. 0 . . . 255 2 RWX
71 CAN receive ID The CAN receive ID of the module. 0 . . . 255 1 RWX
75 telegram pause
time
Pause time before the reply via
RS485/RS232 is sent.
0 . . . 255 [ms] 0 RWX
76 serial host
address
Host address used in the reply tele-
grams sent back via RS485/RS232.
1 . . . 255 1 RWX
77 auto start mode Use automatic TMCL application start
after power up.
0 - do not start TMCL application after
power up
1 - start TMCL application automati-
cally after power up
0 . . . 1 1 RWX
128 application status Actual TMCL application status.
0 - stop
1 - run
2 - step
3 - reset
0 . . . 3 0 R
130 program counter TMCL program counter. 0
. . . 4294967295
0 R
132 tick timer TMCL tick timer. 0
. . . 4294967295
0 RW
Table 13: All Global Parameters of the PD-x-1670 Module in Bank 0
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com