User Manual

PD42-1270 TMCL
™
Firmware Manual • Firmware Version V1.00 | Document Revision V1.0 • 2017-Mar-02
51 / 91
3.6.27 Customer specific Command Extensions (UF0. . . UF7 – User Functions)
These commands are used for customer specific extensions of TMCL. They will be implemented in C by
Trinamic. Please contact the sales department of Trinamic Motion Control GmbH & Co KG if you need a
customized TMCL firmware.
Related commands: none.
Mnemonic: UF0. . . UF7
Binary Representation
Instruction Type Motor/Bank Value
64. . . 71 <user defined> 0 <user defined> 0 <user defined>
Reply in Direct Mode
Status Value
100 - OK user defined
©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.