User Manual

PD42-1270 CANopen
®
Firmware Manual • Firmware Version V3.19 | Document Revision V1.0 • 2017-Mar-02
63 / 106
5.1.2 Object 605B
h
: Shutdown Option Code
This object indicates what action is performed if there is a transition from operation enabled state to ready
to switch on state. The shutdown option code always has the value 0 as only this is supported.
Value Definition
Value Definition
0 Disable drive function (switch off the power stage)
Table 184: Value Description (605B
h
)
Object Description
Index Name Object Type Data Type
605B
h
Shutdown option code Variable UNSIGNED16
Table 185: Object Description (605B
h
)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 rw no 0 0
Table 186: Entry Description (605B
h
)
5.1.3 Object 605C
h
: Disable Operation Option Code
This object indicates what action is performed if there is a transition from operation enabled state to
switched on state. The disable operation option code always has the value 1 as only this is supported. The
slow down ramp is the deceleration value of the used mode of operation.
Value Definition
Value Definition
1 Slow down on slow down ramp
Table 187: Value Description (605C
h
)
Object Description
Index Name Object Type Data Type
605C
h
Disable operation option code Variable UNSIGNED16
Table 188: Object Description (605C
h
)
©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.