User Manual

PD42-1240 TMCL
™
Firmware Manual • Firmware Version V1.45 | Document Revision V1.02 • 2018-DEC-03
84 / 132
14
RunRight :
16 RORA 0
RSUB
18
MotorStop :
20 GAP 2, 0
JC ZE , MotorIsStopped
22 MST 0
MotorIsStopped :
24 RSUB
Binary form of CALL LT, RunLeft
(assuming RunLeft at address
100)
Field Value
Target address 01
h
Instruction number 50
h
Type 06
h
Motor/Bank 00
h
Value (Byte 3) 00
h
Value (Byte 2) 00
h
Value (Byte 1) 00
h
Value (Byte 0) 64
h
Checksum BB
h
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com