Datasheet

PD-x-1670 Hardware Manual • Hardware Version V1.20 | Document Revision V1.00 • 2018-OCT-26
4 / 19
2 Order Codes
Order Code Description Size (LxWxH)
PD42-1-1670-TMCL PANdrive, BLDC, +24V DC, 4000rpm, 0.06Nm, CAN in-
terface, TMCL firmware
42mm x 42mm x 53mm
PD42-2-1670-TMCL PANdrive, BLDC, +24V DC, 4000rpm, 0.12Nm, CAN in-
terface, TMCL firmware
42mm x 42mm x 73mm
PD42-3-1670-TMCL PANdrive, BLDC, +24V DC, 4000rpm, 0.18Nm, CAN in-
terface, TMCL firmware
42mm x 42mm x 93mm
Table 1: Order codes PANdrives™ with TMCL firmware
Order Code Description Size (LxWxH)
PD42-1-1670-CANopen PANdrive, BLDC, +24V DC, 4000rpm, 0.06Nm, CAN
interface, CANopen firmware
42mm x 42mm x 53mm
PD42-2-1670-CANopen PANdrive, BLDC, +24V DC, 4000rpm, 0.12Nm, CAN
interface, CANopen firmware
42mm x 42mm x 73mm
PD42-3-1670-CANopen PANdrive, BLDC, +24V DC, 4000rpm, 0.18Nm, CAN
interface, CANopen firmware
42mm x 42mm x 93mm
Table 2: Order codes PANdrives™ with CANopen firmware
Order Code Description
PD-1670-CABLE Cable loom for PD42-x-1670:
• 1x cable loom for interface connector with 8pin JST PHD series connector
Table 3: Order codes cable loom
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at
www.trinamic.com