User manual

TMCM-6110 Hardware Manual (V1.10 / 2012-JAN-25) 17

5 On-board LEDs

The board offers two LEDs in order to indicate board status. The function of both LEDs is dependent on

firmware version.

With standard TMCL firmware the green LED should be slowly flashing during operation and the red LED should

be off. Please see separate TMCM-6110 TMCL™ firmware manual for additional information.

When there is no valid firmware programmed into the board or during firmware update the red and green

LEDs are permanently on.

Red LED

Green LED

Figure 5.1: On-board LEDs