Trina Allmax M Plus Solar Module Installation Manual (IEC-UL)

Date: April, 2016 DOC: PS-M-0434 A Page - 15 - of 15
In the event that a module is damaged (broken glass or scratch on back sheet) and needs to be replaced then
 Observe the safety precautions listed earlier in the manual
 Wear cut resistant gloves and other personal protective equipment required for the particular installation.
 Isolate the impacted array string to prevent current flow before attempting to remove the module.
 Disconnect the connectors of the affected module using the related disconnect tool provided by suppliers.
 Replace the damaged module with a new module of the same type.
 Check the open circuit voltage of the array string and verify that this is within 10V of the other strings to be
connected in parallel.
 Turn the isolator back on.
• Troubleshooting:
 If your installation does not work properly, please inform your installer immediately.
• Reporting Technical Issues or Claims:
 Contact your installer
 Contact Trina Solar after sales service team at http://customerservice.trinasolar.com
 Submit the Customer Feedback form at: http://www.trinasolar.com/ and one of our technical service
representatives will contact you within 5 business days. A username and password is required to send feedback
from the customer service link
 For module specifications or datasheets, please download from: http://www.trinasolar.com/
9. WARNING
WARNING: For any electrical maintenance, the PV system must first be shut down. Improper maintenance can
cause lethal electric shock and/or burns.