User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 37
5. Place the Vehicle Adapter or Control Module in the TrimTrac 1.5 base
while aligning the arrow on Vehicle Adapter or Control Module with
the arrow on the TrimTrac 1.5 base.
6. Press down on the Vehicle Adapter or Control Module to snap in
securely in place on all four corners making sure all corner tabs are all
fully engaged.
7. Route the wires and press the molded rubber piece into the channel
provided.
8. Install TrimTrac 1.5 base cover and tighten the hold down screw.
9. Place the TrimTrac 1.5 at a slight incline (TrimTrac logo facing up)
with as clear of a view of the sky as possible. Use the optional metal
bracket for permanent installations.
STAND-BY BATTERY RECHARGE:
The internal stand-by battery should be recharged no less frequently than once
every three months.