User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 158
Parameter Value Messages
GSM Status Code 0=Network Available
1=Message Logged (i.e. Report Delay Flag set=1)
2=Network Timeout
3=SIM Error / No SIM
4=SIM PIN Error
5=Pre-TX log (Low battery).
Position Age 0=Current (i.e. no motion since last position)
1=Aged (i.e. motion has occurred since last position)
HPA Status 0=Normal; 1=Activated; 2=Sent; 3=Acknowledged; 4=Monitor
Activated
MPA Status 0=Normal; 1=Activated; 2=Sent; 3=Acknowledged; 4=Monitor
Activated
LPA Status 0=Normal; 1=Activated; 2=Sent; 3=Acknowledged; 4=Monitor
Activated
Geofence Status 0=Normal; 1=Violation; 5= New LPA-based Geofence
External Power 0=Bad (Below 5 VDC); 1=Good (5 VDC or higher)
>RTKP
>RTKS
Latitude WGS-84 Coordinates. Units of Degrees to 7 decimal places plus ‘+’
sign = North and ‘-‘ = South.
(-90.0000000 to +90.0000000)
Longitude WGS-84 Coordinates. Units of Degrees to 7 decimal places plus ‘+’
sign = East and ‘-‘ = West.
(-180.0000000 to +180.0000000)
Altitude WGS-84 Altitude reference to MSL. In Feet, always 5 Digits plus
sign (-99999 to +99999)
Horizontal Speed Miles Per Hour. Always 3 Digits
Heading Relative to True North, increasing Easterly. Units of Degrees.
Always 3 Digits. (000-359)
>RTKP
Runtime Motion-based Reading Accumulated seconds since last reset, always 10 digits
Runtime LPA-based Reading Accumulated seconds since last reset, always 10 digits
Runtime Motion-based Reset
Confirmation
0=Report without Reset; 1=Report with Reset; 2=Disabled
>RTKM