User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 155
Geofence Settings:
Parameter Unit/Notes Default Messages Commands
Geofence ID Unique geofence identifier 1 or 2 1
Geofence Enforcement 0=Disabled; 1=Enforced 24/7; 2=LPA Input Enforced;
3=LPA Centered and Enforced.
0
Reserved Future Use 0
Geofence Delta X 100s of meters (1 – 10000) Note: East-West length of
rectangular Geofence area or, if circular, the diameter.
1=100 Meters
1
Geofence Delta Y 100s of meters (0, 1 – 10000) Note: If set to “0”, then
circular Geofence area; else rectangular Geofence area.
1=100 Meters
1
Geofence Center Latitude WGS-84 Coordinates. Units of Degrees to 7 decimal
places plus ‘+’ sign = North and ‘-‘ = South.
(-90.0000000 to +90.0000000)
+0.0000000
Geofence Center
Longitude
WGS-84 Coordinates. Units of Degrees to 7 decimal
places plus ‘+’ sign = East and ‘-‘ = West.
(-180.0000000 to +180.0000000)
+0.0000000
>STKK
>QTKK
>RTKK
AT+CTKK
Geofence Type 0=Boundary Crossing; 1=Inclusive; 2=Exclusive 1 >STKZ AT+CTKZ
Table 89, Geofence Settings.