User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 137

RESP_METERS

This is the response message to the QUERY_METERS message. This message is

also sent whenever either Runtime meter reaches it automatic report threshold, if

so enabled. (See SET_EXT2_APP_CONFIG for runtime meter setup

instructions).

>RTKABCDDDDDDDDDDEEEEEEEEEE;ID=YYYYYYYY;*ZZ<

Always ‘M’: Indicates a query runtime meters message.

Runtime Meter Motion-based Query:

Runtime Meter LPA-based Query:

DDDDD

Runtime Motion-based Reading: Accumulated seconds since

last reset, always 10 digits

EEEEE

Runtime LPA-based

Reading: Accumulated seconds since last

reset, always 10 digits

YYYYYYYY

Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY

Checksum.

Table 75, RESP_METERS Message

RESP_PROV_CONFIG

This is the response message to the SET_PROV_CONFIG and

QUERY_CONFIG message containing the provisioning information.

>RTKABBBBBBBBBBBBBBBBBBBBBBBB;ID=YYYYYYYY;*ZZ<

TrimTrac Configuration Set: ‘V’ = Provisioning

Parameters

BBBBBBBB

SMS Destination Address. 24 characters including optional

international dialing “+” sign and country code for SMS messages..

Field padding in SPACES (not 0’s) before the international

dialing “+” sign

YYYYYYYY

Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY

Checksum.

Table 76, RESP_PROV_CONFIG Message