User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 136
RESP_GPRS_SETUP_CONFIG
This is the response message to the SET_ GPRS_SETUP _CONFIG and
QUERY_CONFIG message containing the GPRS Setup Parameter values.
>RTKABBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB”CCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC”DDDDDDDDDDDDDDDDDDDD”
;PW=PPPPPPPP;ID=YYYYYYYY;*ZZ<
A
TrimTrac-1.5 Configuration Set: ‘J’ = GPRS Communication
Configuration Parameters
BBB…BBB
(40
chars)
GPRS APN: Access Point Name (APN) Web Address up to 40
case sensitive alphanumeric characters. Example:
“apn.trimble.com”. Note: The quote (“) symbol must be used to
terminate this text field. It may also be used to terminate this
field early. Default <Empty>
CCC…CCC
(40
chars)
GPRS Username: Up to 40 case sensitive alphanumeric
characters. Note: The quote (“) symbol must be used to
terminate this text field. It may also be used to terminate this
field early. Default <Empty>
DDD…DDD
(20
chars)
GPRS Password: Up to 20 case sensitive alphanumeric
characters. Note: The quote (“) symbol must be used to
terminate this text field. It may also be used to terminate this
field early. Default <Empty>
YYYYYYYY
Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY
ZZ
Checksum.
Table 73, RESP_ GPRS_SETUP _CONFIG Message
RESP_GPS_CONFIG
This is the response message to the SET_GPS_CONFIG and QUERY_CONFIG
message containing the GPS Configuration.
>RTKABBCCCDDDEEEF;ID=YYYYYYYY;*ZZ<
A
TrimTrac Configuration Set: ‘G’ = GPS Parameters
BB
GPS Elevation Mask. In degrees (0-30)
CCC
GPS PDOP Mask. In tenths of PDOP (60 – 200)
DDD
GPS PDOP Switch. In tenths of PDOP (40 – 120)
EEE
GPS Signal Mask. In tenths of AMUs (10 – 80)
F
GPS Dynamics Mode.
(Do Not Change)
YYYYYYYY
Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY
ZZ
Checksum.
Table 74, RESP_GPS_CONFIG Message