User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 123
Query Messages
QUERY_CONFIG
This QUERY_CONFIG message is used by the server application to request the
TrimTrac 1.5 send its TrimTrac Application, GPS or Communication parameters
in the appropriate RESP_APP_CONFIG, RESP_PROV_CONFIG or
RESP_GPS_CONFIG message.
>QTKA;PW=PPPPPPPP;ID=YYYYYYYY;*ZZ<
A
TrimTrac Configuration Set:
‘A’ = Application Parameters
‘F’ = GPRS Connection Parameters
‘G’ = GPS Parameters
‘J’ = GPRS Setup Parameters
‘K’ = Geofence Parameters
‘V’ = Provisioning Parameters
‘X’ = Extended Application Para.
‘Y’ = MODULE-only Application
Para.
‘Z’ = Extended 2 Application Para.
PPPPPPPP
Security Password. Always 8 alphanumeric characters, UPPER
CASE ONLY.
Default 00000000
YYYYYYYY
Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY
ZZ
Checksum.
Table 60, QUERY_CONFIG Message
QUERY_GEOFENCE_CONFIG
This QUERY_GEOFENCE_CONFIG message is used by the server application
to request the TrimTrac 1.5 send its geofence parameters in the appropriate
RESP_GEOFENCE_CONFIG message.
>QTKABB;PW=PPPPPPPP;ID=YYYYYYYY;*ZZ<
A
TrimTrac Configuration Set:
‘K’ = Geofence Parameters
BB
Geofence ID: Unique geofence identifier 1 or 2. Use lead 0.
PPPPPPPP
Security Password. Always 8 alphanumeric characters, UPPER
CASE ONLY.
Default 00000000
YYYYYYYY
Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY
ZZ
Checksum.
Table 61, QUERY_GEOFENCE_CONFIG Message