User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 122

SET_CONTROL_OUTPUT

This message is sent by the server to set the Control Module Output pins to the

desired state. When received the device will send a RESP_CONTROL_OUTPUT

message.

>STKABCDDDDDDDDDDDDDDDD;PW=PPPPPPPP;ID=YYYYYYYY;*ZZ<

Always ‘U’: Indicates a set Control Module output message.

Output 1: 0=Output Low; 1=Output High; 2=No Change.

Output 2: 0=Output Low; 1=Output High; 2=No Change.

DDDD

Reserved for future use. 16 digits. Must be sent as

‘0000000000000000’.

PPPPPPPP

Security Password

. Always 8 alphanumeric characters, UPPER

CASE ONLY.

. Default 00000000

YYYYYYYY

Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY

Checksum.

Table 59, SET_CONTROL_OUTPUT Message