User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 119
SET_GPRS_SETUP_CONFIG
This message is used to set the GPRS Setup Configuration Values in the
TrimTrac-1.5 device. When received the TrimTrac-1.5 device will send a
RESP_GPRS_SETUP_CONFIG message in response.
>STKABBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB”CCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC”DDDDDDDDDDDDDDDDDDDD”
;PW=PPPPPPPP;ID=YYYYYYYY;*ZZ<
A
TrimTrac-1.5 Configuration Set: ‘J’ = GPRS Communication
Configuration Parameters
BBB…BBB
(40
chars)
GPRS APN: Access Point Name (APN) Web Address up to 40
case sensitive alphanumeric characters. Example:
“apn.trimble.com”. Note: The quote (“) symbol must be used to
terminate this text field. It may also be used to terminate this
field early. Default <Empty>
CCC…CCC
(40
chars)
GPRS Username: Up to 40 case sensitive alphanumeric
characters. Note: The quote (“) symbol must be used to
terminate this text field. It may also be used to terminate this
field early. Default <Empty>
DDD…DDD
(20
chars)
GPRS Password: Up to 20 case sensitive alphanumeric
characters. Note: The quote (“) symbol must be used to
terminate this text field. It may also be used to terminate this
field early. Default <Empty>
PPPPPPPP
Security Password. Always 8 alphanumeric characters, UPPER CASE
ONLY.
. Default 00000000
YYYYYYYY
Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY
ZZ
Checksum.
Table 55, SET_ GPRS_SETUP _CONFIG Message