User's Manual

DRAFT TrimTrac 1.5 Technical Manual v0.3ab 90
AT+CTKK?
CTKK: <Geofence ID>,<Geofence Enforcement>,<Reserved>,<Geofence Delta
X>,<Geofence Delta Y>,<Geofence Center Latitude>,<Geofence Center
Longitude>
OK
<Geofence ID> Unique geofence identifier 1 or 2. Default: 1
<Geofence Enforcement > 0=Disabled; 1=Enforced 24/7; 2=LPA Input
Enforced; 3=LPA Centered and Enforced.
.
Default:
0
<Reserved> Future Use. Default: 0
<Geofence Delta X> 100s of meters (1 – 10000) Note: East-West
length of rectangular Geofence area or, if circular,
the diameter. 1=100 Meters. Default: 1
<Geofence Delta Y> 100s of meters (0, 1 – 10000) Note: If set to “0”,
then circular Geofence area; else rectangular
Geofence area. 1=100 Meters Default: 1
<Geofence Center Latitude> WGS-84 Coordinates. Units of Degrees to 7
decimal places plus ‘+’ sign = North and ‘-‘ =
South.
(-90.0000000 to +90.0000000). Default:
+0.0000000
<Geofence Center Longitude> WGS-84 Coordinates. Units of Degrees to 7
decimal places plus ‘+’ sign = East and ‘-‘ =
West.
(-180.0000000 to +180.0000000). Default:
+0.0000000
Table 31, AT+CTKK? Query