User's Manual

DRAFT TrimTrac Locator Technical Manual 34
SET_APP_CONFIG
The SET_APP_CONFIG message is used by the server application to set the
TrimTrac Application parameters in the TrimTrac locator. When received the
TrimTrac locator will send a RESP_APP_CONFIG message in response.
>STKABBBBBBCCCCCCDDDDDDEEEEEEFFFFFFGGGTTHIJK;PW=PPPPPPP
P;ID=YYYYYYYY;*ZZ<
A TrimTrac Configuration Set: ‘A’ = Application Parameters
BBBBBB Idle Timeout. Parameter T1. In seconds (10 – 999999).
Default 43200
CCCCCC Fix Timeout. Parameter T2. In seconds (10 – 999999).
Default 300
DDDDDD Comm Timeout. Parameter T3. In seconds (10 – 999999).
Default 120
EEEEEE Sleep Time. Parameter T4. In seconds (10 – 999999). Default 900
FFFFFF Query Time. Parameter T5. In seconds (10 – 999999). Default 60
GGG Almanac Timeout. Parameter T6. In hours (10 – 999). Default 168
TT Motion Timeout. Parameter T7. In seconds (5 – 99). Default 15
H Motion Report Flag. 0:None; 1:Report first motion before GPS fix.
Default 0
I Report Delay Flag. 0:Log & Transmit messages; 1:Log messages.
Default 0
J Diagnostics Mode. 0: None; 1: LED. Default 1
K Communications Mode. 0: SMS; 1: Future.
Default 0
PPPPPPPP Security Password. Always 8 digits. Default 00000000
YYYYYYYY Unit ID. Unique unit identifier. Always 8 digits. Default 00000000
ZZ Checksum.
Table 14, SET_APP_CONFIG Message