User's Manual

DRAFT TrimTrac Locator Technical Manual 23
Environmental Conditions
The TrimTrac locater mounting location must not exceed the environmental
specifications of the device. For instance, it cannot be installed inside a vehicle’s
engine compartment, wheel well, chassis or any other location in which the
conditions can reasonably be expected to exceed the device environmental
specifications.
Exposure to RF Radiation
As noted in the Safety First and Detailed Safety Information chapters, on pages 1
and 2, respectively, the TrimTrac locator is not to be used in direct contact with
the body. A minimum of minimum separation distance of 0.590 inch (15 mm)
must be maintained during operation. The TrimTrac locator is not intended for
body-worn applications.
Batteries
The TrimTrac locator is designed to work with four standard AA alkaline
batteries. Insert the batteries with the positive and negative polarities as indicated
on the battery pack label. Do not reverse polarities or use non-alkaline AA
batteries; otherwise, permanent damage to the TrimTrac locator may result or
there may be a risk of explosion or fire. Dispose of used batteries in accordance
with the battery manufacturer instructions.