User's Manual

DRAFT TrimTrac Locator Technical Manual 20
Timeout>
<Motion
Timeout>
In seconds (5 – 99).
<Motion Report
Flag>
0:None; 1:Report first motion before GPS fix.
<Report Delay
Flag>
0:Log & Transmit messages; 1:Log messages.
<Diagnostics Mode> 0: None; 1: LED.
<Communications
Mode>
0: SMS; 1: Future.
Table 7 AT+CTKC Query
AT+CTKG GPS Configure
The AT+CTKG command configures the GPS parameters. This command
mirrors the functionality of the over-the-air GPS_CONFIG message. It can query
the current settings or change them to new values.
AT+CTKG=<Elevation Mask>, <PDOP Mask>, <PDOP Switch>,
<AMU Mask>, <Dynamics Mode>
OK
<Elevation
Mask>
In degrees (0-90). Default 5
<PDOP Mask> In tenths of PDOP. Default 120
<PDOP Switch> In tenths of PDOP. Default 60
<AMU Mask> In tenths of AMUs. Default 20
<Dynamics Mode> Undefined = 0
Land = 1
Sea = 2
Air = 3
Stationary = 4
Automobile = 5; Default 5
Table 8 AT+CTKG Assignment
AT+CTKG?
+CTKG<Elevation Mask>, <PDOP Mask>, <PDOP Switch>,
<AMU Mask>, <Dynamics Mode>
OK
<Elevation
Mask>
In degrees (0-90)
<PDOP Mask> In tenths of PDOP
<PDOP Switch> In tenths of PDOP
<AMU Mask> In tenths of AMUs
<Dynamics Mode> Undefined = 0
Land = 1
Sea = 2
Air = 3
Stationary = 4