User's Manual

DRAFT TrimTrac Locator Technical Manual 19

Table 5 AT+CTKP Query

Note that when the SIM PIN field and the Security Password fields are queried

using either AT+commands or TrimTrac Application Protocol messages, they are

shown masked out with the ‘*’ character to prevent theft of the information.

AT+CTKC Application Configuration

The AT+CTKC command is used to configure the Read/Write parameters of the

TrimTrac locator. It can query the current settings or change them to new values.

AT+CTKC=<Idle Timeout>, <Fix Timeout>, <Comm Timeout>,

<Sleep

Time>, <Query Time>, <Almanac Timeout>, <Motion

Timeout>, <Motion Report Flag>, <Report Delay Flag>,

In seconds (10 – 999999). Default 43200

<Fix Timeout> In seconds (10 – 999999). Default 300

In seconds (10 – 999999). Default 120

<Sleep Time> In seconds (10 – 999999). Default 900

<Query Time> In seconds (10 – 999999). Default 60

<Almanac

Timeout>

In hours (10 – 999). Default 168

<Motion

Timeout>

In seconds (5 – 99). Default 15

<Motion Report

Flag>

0:None; 1:Report first motion before GPS fix. Default 0

<Report Delay

Flag>

0:Log & Transmit messages; 1:Log messages. Default 0

<Diagnostics Mode> 0: None; 1: LED. Default 1

<Communication

s Mode>

0: SMS; 1: Future. Default 0

Table 6 AT+CTKC Assignment

AT+CTKC?

+CTKC<Idle Timeout>, <Fix Timeout>, <Comm Timeout>,

<Sleep Time>, <Query Time>, <Almanac Timeout>, <Motion

Timeout>, <Motion Report Flag>, <Report Delay Flag>,

<Idle Timeout> In seconds (10 – 999999).

<Fix Timeout> In seconds (10 – 999999).

<Comm Timeout> In seconds (10 – 999999).

<Sleep Time> In seconds (10 – 999999).

<Query Time> In seconds (10 – 999999).

<Almanac

In hours (10 – 999).