User's Manual

DRAFT TrimTrac Locator Technical Manual 17
5. If you wish to view what you type on the HyperTerminal Screen, click on
File, Properties, Settings, ASCII Settings and checkmark the “Echo Typed
Characters Locally” box. Click “OK” to close each panel.
6. To check whether you have successfully connected the TrimTrac and
Provisioning Module to HyperTerminal, type:
• at+ctkc?
7. Assuming the factory default configuration has not been previously
changed, the following response should appear:
• +ctkc: 43200,300,120,60,60,168,15,0,0,1,0
• OK
8. You are now ready to begin provisioning the TrimTrac locator(s) by
typing the AT+commands described in the following sections.
9. When complete, reinstall the battery pack with four “AA” batteries.