User's Manual

4 Installing the SNR900 Network
26 SNR900 Operation Manual
4.4.2 Infrastructure/Base Station Power and I/O Cable
The cable shown in Figure 4.6 is used for base station and repeater
installations of SNR900s. Cables come in the lengths shown in
Table 4.3.
Table 4.3 Available cable lengths
Note – Most installations of infrastructure radios require either a
7.5 m (25 ft) or a 30 m (99 ft) length.
Seal unused connectors by covering them with plastic tape.
Figure 4.6 Radio power and I/O cable (PN 38968-25)
Part number Cable length
38968-25 7.5 m (25 ft)
40942-03 1 m (3 ft)
40942-40 12 m (40 ft)
40942-99 30 m (99 ft)
8-pin Bendix to SNR900
DB-9 to PC for data
or configuration
Conxall to
MS750
TA-3 p ower
SNR900.book Page 26 Friday, December 3, 2004 2:02 PM