User's Manual

SNR900 Operation Manual 15
Configuring the SNR900 3
3.3.6 Defaults
Table 3.1 shows the default factory settings for the SNR900.
Table 3.1 SNR900 default settings
3.4 Diagnostics and Firmware Upgrade
Use WinFlash to download a diagnostics file from the SNR900 to an
office computer or to upgrade the radio firmware. These options are
available in the WinFlash Operation Selection window.
For firmware upgrades, contact your Trimble dealer. The dealer will
supply a new software file to perform the upgrade.
Item Default setting
Network number Network 1
Radio mode Rover
Baud rate 38400
Parity None
SNR900.book Page 15 Friday, December 3, 2004 2:02 PM