User's Manual

SNR900 Operation Manual 13
Configuring the SNR900 3
5. When WinFlash has successfully connected to the radio, the
Properties window appears:
6. From the Properties window, configure the Network number,
Radio Mode, and Port settings. Once these settings are correct,
click
Set to send the settings to the radio. The following dialog
appears:
7. To finish, click
Exit. To make further changes, click Menu. The
Operation Selection dialog shown in Step 2 on page 11 appears.
The following sections describe the settings that are available for the
SNR900.
SNR900.book Page 13 Friday, December 3, 2004 2:02 PM