User Manual
Table Of Contents
- CrossCheck® CDPD
- Warranties and Notices
- Regulatory Approvals
- Contents
- About this Manual
- Chapter 1 - Overview
- Chapter 2 - Installation
- Introduction
- Installing the CrossCheck CDPD Mobile Unit
- CrossCheck CDPD Connections
- Inspecting and Unpacking the Shipment
- Installer-Supplied Parts
- Mounting the CrossCheck CDPD
- Choosing the GPS Antenna Mounting Location
- Routing the GPS Antenna Cable
- Choosing a CDPD Cellular Antenna MountingLocation
- Caution – FCC RF Exposure requirements
- Magnetic Cellular Antenna (P/N 46721)
- Bulkhead Cellular Antenna (P/N 46730)
- Routing the Cellular Antenna Cable
- Connecting the Magnetic Cellular Antenna Cable
- Connecting the Permanent-Mount Cellular Cable
- Inputs (IP0 to IP3)
- Pulse Counting Inputs (Pulse 0 to Pulse 2)
- Outputs (XP0 to XP2)
- CrossCheck CDPD Power
- Installing the EchoLDX Kit
- Chapter 3 - Operation
- Appendix A - Specifications
- Reader Comment Form
CrossCheck CDPD Mobile Unit Manual
69
Specifications
A
A.4
I/O Characteristics
Casing Dustproof, waterproof, shock-resistant polycarbonate
Minimum Gain 28 dBi
Maximum Allowable Cable Loss 8 dB
Table A.11 Miniature Magnetic GPS Antenna (P/N 37167)
Item Specification
Size 40.0 mm W x 47.0 mm D x 13.3 mm H
(1.515" W x 1.85" D x 0.524" H)
Weight Antenna and cable: 0.13 kg (4.59 ounces)
Antenna only: 0.045 kg (1.59 ounces)
Operating Temperature –40°C to +85°C
Storage Temperature –55°C to +85°C
Humidity 5% to 95% RH, non-condensing at +40°C
Casing Dustproof, waterproof, shock-resistant polycarbonate with
magnetic mount
Minimum Gain 26 dBi
Table A.12 MDT Port
Item Specification
Physical TXD, RXD, RTS, CTS, GND, DTR, DCD, DTS, 8.5 ±.5 V
provided through Pin 9
Baud Rates 9600, No parity, 8 bits, 1 stop bit
Table A.10 Miniature Bulkhead GPS Antenna without Flange (P/N 32434) (Continued)










