User Manual
Table Of Contents
- CrossCheck® CDPD
- Warranties and Notices
- Regulatory Approvals
- Contents
- About this Manual
- Chapter 1 - Overview
- Chapter 2 - Installation
- Introduction
- Installing the CrossCheck CDPD Mobile Unit
- CrossCheck CDPD Connections
- Inspecting and Unpacking the Shipment
- Installer-Supplied Parts
- Mounting the CrossCheck CDPD
- Choosing the GPS Antenna Mounting Location
- Routing the GPS Antenna Cable
- Choosing a CDPD Cellular Antenna MountingLocation
- Caution – FCC RF Exposure requirements
- Magnetic Cellular Antenna (P/N 46721)
- Bulkhead Cellular Antenna (P/N 46730)
- Routing the Cellular Antenna Cable
- Connecting the Magnetic Cellular Antenna Cable
- Connecting the Permanent-Mount Cellular Cable
- Inputs (IP0 to IP3)
- Pulse Counting Inputs (Pulse 0 to Pulse 2)
- Outputs (XP0 to XP2)
- CrossCheck CDPD Power
- Installing the EchoLDX Kit
- Chapter 3 - Operation
- Appendix A - Specifications
- Reader Comment Form
A
Specifications
62
CrossCheck CDPD Mobile Unit Manual
A.1
Introduction
This appendix lists the CrossCheck CDPD Mobile Unit and antenna
specifications.
A.2
Standard Components
The tables include general specifications and requirements for the
following:
• General Specifications, Table A.1
• Firmware Specifications, Table A.2
• GPS Specifications, Table A.3
• GPS Antenna Requirements, Table A.4
• CDPD Cellular Specifications, Table A.5
• Cellular Antenna Requirements, Table A.6
• CrossCheck CDPD Mobile Unit Physical Specifications,
Table A.7
• CrossCheck CDPD Mobile Unit P/N 46707-00, Table A.8
• Miniature Bulkhead GPS Antenna with Flange (P/N 31192-00),
Table A.9
• Miniature Bulkhead GPS Antenna without Flange (P/N 32434),
Table A.10
• Miniature Magnetic GPS Antenna (P/N 37167), Table A.11
• MDT Port, Table A.12
• Discrete Inputs: IP0 to IP3, Table A.13
• Pulse Counter Inputs, Table A.14
• Discrete Outputs: XP0 to XP2, Table A.15
• Component Part Numbers, Table A.16










