User Manual
Table Of Contents
- CrossCheck® CDPD
- Warranties and Notices
- Regulatory Approvals
- Contents
- About this Manual
- Chapter 1 - Overview
- Chapter 2 - Installation
- Introduction
- Installing the CrossCheck CDPD Mobile Unit
- CrossCheck CDPD Connections
- Inspecting and Unpacking the Shipment
- Installer-Supplied Parts
- Mounting the CrossCheck CDPD
- Choosing the GPS Antenna Mounting Location
- Routing the GPS Antenna Cable
- Choosing a CDPD Cellular Antenna MountingLocation
- Caution – FCC RF Exposure requirements
- Magnetic Cellular Antenna (P/N 46721)
- Bulkhead Cellular Antenna (P/N 46730)
- Routing the Cellular Antenna Cable
- Connecting the Magnetic Cellular Antenna Cable
- Connecting the Permanent-Mount Cellular Cable
- Inputs (IP0 to IP3)
- Pulse Counting Inputs (Pulse 0 to Pulse 2)
- Outputs (XP0 to XP2)
- CrossCheck CDPD Power
- Installing the EchoLDX Kit
- Chapter 3 - Operation
- Appendix A - Specifications
- Reader Comment Form
CrossCheck CDPD Mobile Unit Manual
5
Overview
1
1.2.3
Antenna Requirements
CDPD and GPS antennas are required for operation. Bulkhead and
magnetic mount GPS antennas are available from Trimble. Chapter 2
describes the antennas and antenna installation.
The standard CrossCheck CDPD configuration does not include a
GPS or CDPD antenna because the type of antenna required depends
on the application. Antennas must be ordered separately. For more
information, see Appendix A, Specifications.
1.2.4
CrossCheck CDPD System Accessories
Figure 1.1 illustrates the CrossCheck CDPD Mobile Unit and
accessories.
1. CrossCheck CDPD Mobile Unit
2. EchoLDX Message Terminal Kit . The kit includes:
– EchoLDX Terminal
– Power/Data cable
– Pedestal Mounting Kit
– Quick Reference Guide
3. Power and discrete I/O cable
4. GPS antenna with cable and SMA-p connector
5. CDPD antenna with cable and TNC-p connector