Manualshelf

User Guide

ManualsBrandsTrimble ManualsElectronicsTrimble designed limited single-modular transceiver (LMST) 50 hopping channels for FHSS radio, 902.0- 928.0MHz, half-duplex, 127,381bps, BPSK modulation
12345678910
TRM 900 Intergrator’s Guide
11
Antenna Port
A coaxial antenna port is provided for connecting the antenna system to the TRM 900
transceiver. The antenna connector is
a 50-Ohm MMCX type. Appendix B provides part numbers
and manufacturer information for compatible interface and RF connectors.
Warning: Don’t transmit without first connecting an antenna.
Compliance
e TRM 900
transceiver radio modem is designed to be compliant with FCC and Industry
Canada regulatory requirements, including FCC Part 15.247.
Warning: The TRM 900 transceiver is
classified as an intentional radiator of type radio transceiver.
Conducted and radiated emissions of the standard TRM 900 transceiver do not exceed the
requirements of FCC Part 15.247. Trimble is responsible for full compliance of final product.
Label per FCC Rules
T
his limited modular transmitter must be labeled with its own FCC ID number. In the event that
the module is installed inside a host device and the FCC ID of the module is not visible the host
device will display a label referring to the FCC ID of the enclosed module.
Contains: FCC ID: JUP-900MHZ IC: 1756A-900MHZ