User's Manual

5 Using the GPS Receiver
58 Juno SA Handheld User Guide
Supported GPS field software
You can use the Juno SA handheld with any of the software products described below.
TerraSync software
You can install version 5.01 or later of the TerraSync software on a Juno SA handheld.
Use the software to collect and maintain GIS and GPS data.
To install the TerraSync software, run the downloaded setup file. To obtain an
installation code for installation, you must register the Proof-of-Purchase Number
(POPN) that you received when you purchased the software. Detailed installation
instructions are provided in the TerraSync Software Getting Started Guide.
Esri ArcPad software and the Trimble GPScorrect extension
You can install version 8 or later of the Esri ArcPad software on a Juno SA handheld.
Use the software to collect and maintain GIS and GPS data. Detailed installation
instructions for Esri ArcPad software are provided in the ArcPad documentation.
To be able to differentially correct ArcPad GPS data, install version 3.15 or later of the
Trimble GPScorrect extension for Esri ArcPad software on a Juno SA handheld.
You must install the ArcPad software before you install the GPScorrect extension.
Note – Make sure your version of the GPScorrect extension is compatible with the version
of ArcPad software you are using. For more information, go to
www.trimble.com/gpscorrect_ts.asp, click Support Notes and then search for the Mapping
and GIS Product Compatibility List Support Note.
To install the GPScorrect extension, run the downloaded setup file. Detailed
installation instructions are provided in the Trimble GPScorrect Extension Getting
Started Guide.
GPS Controller software
You can install version 2.30 or later of the GPS Controller software on a Juno SA
handheld. Use the software to configure and monitor the status of the internal GPS
receiver.
To install the GPS Controller software, go to www.trimble.com/support.shtml. Click
GPS Controller and then click Downloads. Click the link for the version you want to
install and then follow the instructions in the Installation wizard.