User's Manual

7 Getting Connected
84 Juno Series User Guide
3. To configure the phone to always require a PIN,
select Require PIN when phone is used.
4. Enter the preset PIN assigned by your wireless
service provider.
5. Tap
OK.
To change a PIN:
1. Tap
Change PIN.
2. Enter the current PIN and then tap
Enter.
3. Enter a new PIN and then tap
Enter.
Using the Modem Control (Juno SC handheld only)
You can use the Modem Control application to turn on and turn off the Juno SC
handheld’s cellular modem, enter a PIN for the SIM card, or change the dial string to
connect with the cellular network.
To open the Modem Control:
• Tap the Modem Status indicator on the title bar .
Turn on the cellular modem to be able to connect to a cellular network.
Turn off the cellular modem to prevent the handheld from sending or receiving
wireless signals.
B
Tip – To conserve power, turn off the cellular modem when not in use.
To turn on or turn off the modem using the Modem Control
1. Open the Modem Control (see above)
2. To change the status from On to Off, tap
Modem Power Off.