User's Manual

Juno Series User Guide 83
Getting Connected 7
To turn on or turn off the radios using the Wireless Manager
1. Open the Wireless Manager (see above).
2. Do one of the following:
Note – The Phone option applies only to the Juno SD
handheld.
– Tap All at the top of the screen to turn on the
radios, or to turn off all the radios if they are
already on.
– Tap Wi-Fi, Bluetooth, or Phone to turn on
the radio that you want to use, or to turn off
the radio if it is already on.
The status fields below the
Wi-Fi button, the Bluetooth button, and the Phone
button change from Off when the radios are turned on and show the current
state of the radio. The Wi-Fi status field shows Connecting or Available, and the
Bluetooth status and Phone status fields show On or Visible.
3. Tap
Done to exit the Wireless Manager.
After you turn on the wireless LAN radio, the wireless LAN icon appears in the title
bar to indicate that the wireless LAN radio is enabled. A second icon appears if a
wireless LAN network is detected, and a Notification for the detected network may
appear in the left softkey.
Configuring phone settings (Juno SD handheld only)
You can help to keep data secure by configuring your SIM card with a PIN (personal
identification number). You will need to enter the PIN each time you want to use the
phone.
Most SIM cards are preset with a PIN that is assigned by your wireless service provider.
You will need to enter this PIN first.
Setting a PIN on the Juno SD handheld
To set a PIN, the phone must already be turned on.
1. Open the Wireless Manager (see above).
2. Tap Menu / Phone Settings / Security.