User's Manual

6 Using the Camera
76 Juno Series User Guide
Parts of the camera
Figure 6.1 Juno series handheld – camera controls
Starting the camera application
To start the camera, do one of the following:
1. Press the Camera button on the right side of the device.
2. Tap / Programs / Pictures & Videos / Camera.
When the camera application is started, it is by default in Image Capture mode.
3. To capture a video or an image, press the Camera button.
Note – As the camera has autofocus, there will be a slight delay between pressing the
camera button and the photo being taken. Continue to hold the camera still until you hear
the 'click'.
4. To stop recording of a video, press the Camera button again.
Camera settings
To access the camera settings, tap the screen while in the camera application.
The camera’s current settings are displayed as icons on the screen. Tap the required
icon to change its setting.
The settings that are available will vary depending on whether you are in Image mode
or Video mode.
Lens
Preview mirror
Zoom
Camera button. Press to:
- start camera application
- take photo/record video