User's Manual

3 Using the Windows Mobile Operating System
54 Juno Series User Guide
Voice calls (Juno SD handheld only)
Use the Juno SD handheld to make and receive phone calls. You can enter a number to
dial using the keypad, or select a number from your Contacts list.
To make a phone call:
1. Make sure that a SIM card is installed. See Installing and removing the SIM card,
page 37
2. Make sure that the phone is turned on. See Turning on and turning off the
integrated radios, page 82
3. Do one of the following:
– Press the Start call button.
– Tap the Phone softkey.
4. On the Phone screen which appears, do one of
the following::
– Use the keypad to dial a phone number and
then tap
Talk.
– Tap Hide Keypad to select an option from
the list of previously dialled numbers.
Alternatively, tap the Contacts softkey, tap the required
contact and then tap Call.
Note – When you make a voice call, the screen is blank.
To answer a phone call, press the
Start call button or the Answer softkey.
Note – When you answer a voice call, the screen is blank.
To end a phone call, press the
End call button.
Phone settings
You can change the ring type, ring tone, and keypad sound. If required, you can also set
a PIN for the SIM card.
1. To access Phone Settings, do one of the following:
– Press the Start call button or the Phone softkey and then select Menu /
Options...
– Tap the modem status icon on the title bar of the Today screen and then
tap Settings.
2. Select the Phone tab to set the required ring type, ring tone, and keypad sound.