User's Manual

Juno Series User Guide 83
Getting Connected 6
Note – Before you begin the steps below, Trimble recommends that you confirm that the
phone can access the Internet directly. If necessary, contact the cellular phone provider
and confirm whether you must enter a user name, password, and domain details when
connecting an external device to the phone using Bluetooth dialup networking.
Step 1: Connecting the handheld to the phone and configuring the
connection to the dialup network
1. Make sure that the handheld and the Bluetooth device you want to connect to
are within five meters of each other, and that the Bluetooth radio in each device
is turned on. For more information, see Turning on and turning off the
integrated radios, page 70.
2. On the handheld, tap / Settings / Connections / Connections.
3. Below My ISP, tap Add a new modem connection.
4. Enter the name for the connection.
5. From the Select a Modem dropdown list, select
Bluetooth and then tap
Next on the right softkey.
6. If the phone you want to connect to is:
– listed, go to Step 7 below.
– not listed:
a. Tap Add new device. The handheld
searches for other Bluetooth devices and
displays them in the list.
If the handheld’s integrated Bluetooth
radio is turned off, it is now automatically
turned on.
b. From the list of available devices, select the device you want to connect
to and then tap
Next on the right softkey.
c. To pair with the phone, enter a passcode of your choice that you will
easily remember onto the handheld and then tap
Next on the right
softkey.
d. When prompted by the phone, enter the same password and then
accept the connection.
e. On theJuno seriess handheld, in the Partnership Settings screen, make
sure that Dialup Networking (DUN) is selected and then tap
Finish on
the right softkey.
You have now created a partnership between the Juno series handheld and
the phone so that they can communicate.
7. From the My Connections list, select the phone that you want to configure the
connection to.