User's Manual

Juno Series User Guide 71
Getting Connected 6
To turn on or turn off the radios using the Wireless Manager
1. Open the Wireless Manager (see above).
2. Do one of the following:
– Tap All at the top of the screen to turn on
both radios, or to turn off both radios if they
are already on.
– Tap Wi-Fi or Bluetooth to turn on the radio
that you want to use, or to turn off the radio
if it is already on.
The status fields below the
Wi-Fi button and the
Bluetooth button change from Off when the
radios are turned on and show the current state of
the radio. The Wi-Fi status field shows Connecting
or Available, and the Bluetooth status field shows On or Visible.
3. Tap
Done to exit the Wireless Manager.
After you turn on the wireless LAN radio, the wireless LAN icon appears in the title
bar to indicate that the wireless LAN radio is enabled. A second icon appears if a
wireless LAN network is detected, and a Notification for the detected network may
appear in the left softkey.
Using the Modem Control
You can use the Modem Control application to turn on and turn off the Juno SC
handheld’s cellular modem, enter a PIN for the SIM card, or change the dial string to
connect with the cellular network.
To open the Modem Control, do one of the following:
• Tap the Modem Control indicator in the Today screen.
• Tap / Settings / Connections / Modem Control.
Turn on the cellular modem to be able to connect to a cellular network.
Turn off the cellular modem to prevent the handheld from sending or receiving
wireless signals.
B
Tip – To conserve power, turn off the cellular modem when not in use.
To turn on or turn off the modem using the Modem Control
1. Open the Modem Control (see above)
2. The modem’s current status will show on the top line, as Modem Power On or
Modem Power Off.
3. To change the status from On to Off, tap the line Modem Power On. The status
will then change to Modem Power Off.
4. Tap
Exit to close the Modem Control.