User's Manual
Table Of Contents
- UniStone
- 1 General Device Overview
- 2 Basic Operating Information
- 3 Interfaces
- 4 General Device Capabilities
- 5 Bluetooth Capabilities
- 6 Electrical Characteristics
- 7 Package Information
- 8 Acronyms & Abbreviations
UniStone
General Device Overview
Product Overview 7 T3130-8XV10PO5-7600, 2007-01-31
1 General Device Overview
1.1 Features
General
• Complete Bluetooth 2.0 + EDR solution
• Ultra low power design in 0.13 µm CMOS
• Temperature range from -40°C to 85°C
• Integrates ARM7TDMI, RAM and patchable ROM
• On-module voltage regulators. External supply 2.9-4.1V
• On-module EEPROM with configureable data
• Reference clock included
• Low power clock from internal oscillator or external low power clock (e.g. 32.768 kHz)
• Dynamic low power mode switching
Interfaces
• 3.25 MBaud UART with transport layer detection (HCI UART, HCI Three-Wire UART)
• PCM/I2S interface for digital audio
• WLAN coexistence interface
• General purpose I/Os with interrupt capabilities. JTAG for boundary scan and debug
RF
• Transmit power programmable from -45 dBm to 4.5 dBm
• Transmit power typ. 2.5 dBm (default settings)
• Receiver sensitivity typ. -86 dBm
• Integrated antenna switch, balun and antenna filter
• Integrated LNA with excellent blocking and intermodulation performance
• No external components except antenna
• Digital demodulation for optimum sensitivity and co-/adjacent channel performance
Bluetooth
• Piconet with seven slaves. Scatternet with two slave roles while still being visible
• SCO and eSCO with hardware accelerated audio signal processing
• Power control and RSSI. Hold, Park and Sniff.
• Adaptive Frequency Hopping, Quality of Service, Channel Quality Driven Data Rate
• Bluetooth security features: Authentication, Pairing and Encryption
• Bluetooth test mode and Infineon’s active Bluetooth tester mode