User's Manual

UniStone
Electrical Characteristics
Product Overview 28 T3130-8XV10PO5-7600, 2007-01-31
6.3 DC Characteristics
6.3.1 Pad Driver and Input Stages
Table 6-3 Internal1 (1.5 V) supplied Pins (see Chapter 1.4)
Table 6-4 Internal2 (2.5 V) supplied Pins (see Chapter 1.4)
Parameter Condition Limit Values Unit
Min Typ Max
Input low voltage - -0.3 0.27 V
Input high voltage - 1.15 3.6 V
Output low voltage I
OL
=1mA 0.25 V
Output high voltage I
OH
=-1mA, 1.1 V
Continuous Load
1)
1)
The totaled continuous load for all Internal1 supplied pins shall not exceed 2mA at the same time
1mA
Pin Capacitance 10 pF
Magnitude Pin
Leakage
input and output
drivers disabled
0.01 1 µA
Parameter Condition Limit Values Unit
Min Typ Max
Input low voltage - -0.3 0.45 V
Input high voltage -P0.10 1.93 2.8 V
-Other pins 1.93 3.6 V
Output low voltage I
OL
=5mA 0.25 V
Output low voltage I
OL
=2mA 0.15 V
Output high voltage I
OH
=-5mA, 2.0 V
Output high voltage I
OH
=-2mA, 2.1 V
Continuous Load
1)
1)
The totaled continuous load for all Internal2 supplied pins shall not exceed 35mA at the same time
5mA
Pin Capacitance 10 pF
Magnitude Pin
Leakage
input and output
drivers disabled
0.01 1 µA