User's Manual
Table Of Contents
- GeoExplorer® 6000 series
- Legal Notices
- Safety Information
- Contents
- Introduction
- Getting Started
- Using the Windows Mobile Operating System
- Connecting to an Office Computer
- Using the GNSS Receiver
- Supported GNSS field software
- Configuring the GNSS field software to connect to the receiver
- Using the GNSS field software
- Improving GNSS productivity using Floodlight satellite shadow reduction technology
- Ensuring the accuracy of your GNSS data
- Activating the Floodlight technology and the NMEA output options
- Differential GNSS explained
- Outputting NMEA data to external equipment
- Configuring NMEA output
- Getting Connected
- Wireless connection information
- Connecting to a cellular network from the modem
- Connecting to a Wi-Fi access point
- Connecting to a Bluetooth-enabled device
- Connecting to a Bluetooth device as a client
- Providing Bluetooth services as a host
- Setting up a Bluetooth connection
- Connecting to a Bluetooth-enabled phone for Internet access or real-time corrections (including VRS networks)
- Connecting to the Internet through a Bluetooth-enabled phone using the Bluetooth PAN profile
- Connecting to a Bluetooth-enabled serial device
- Connecting to an office computer using Bluetooth wireless technology
- Outputting GNSS data to other devices using Bluetooth wireless technology
- Enabling other devices to transfer files using Bluetooth wireless technology
- Beaming files to or from another device
- Accessing a corporate network through your Internet connection
- Connecting to other devices using the USB to serial converter
- Using the Camera
- Troubleshooting
GeoExplorer 6000 Series User Guide 41
Using the Windows Mobile Operating System 3
Status indicators
Status indicators that appear in the title bar at the top of the screen are as follows:
Battery status indicators
The battery status icon on the title bar of the Home screen or the Start screen shows
the status of the battery charge. Tap the title bar and then on the pull-down list tap the
icon to access the Power control dialog. See Checking the level of battery power,
page 28.
Speaker status indicators
The speaker status icon on the title bar of the Home screen or the Start screen shows
the status of the speaker. Tap the title bar and then on the pull-down list tap the
icon to adjust the volume and to turn the speaker on or off.
Icon Description
Battery has full charge
Battery has high charge
Battery has medium charge
Battery has low charge
Battery has very low charge (20% or less)
Battery charging/using external power
Icon Description
Speaker is on
Speaker is off